Heater

DN20× Fin height: 10-15mm, fin pitch: 7-8mm, fin thickness: 0.5-0.75mm;

The heater adopts a structure of stainless steel tubes wound with aluminum fins (L-shaped fins) or stainless steel tubes wound with stainless steel fins (U-shaped fins).

Advanced winding process, good wrapping performance and high heat transfer efficiency;

The heat exchanger frame is made of 2.0mm hot-dip galvanized steel sheet folded at the edges and treated for rust prevention.

Each unit is strictly tested for constant pressure and leakage in accordance with the company's standards before leaving the factory.

It can be designed and manufactured according to the user's requirements.